Lean-Clean 360-2 Two Basket Rotary Industrial Parts Washer

The Jenfab LeanClean 360-2 is an ergonomically designed Front Loading Rotating Basket Parts Washer. Ideal for general parts cleaning of screw machine, machined parts, and stampings as well as critical cleaning of precision parts and orthopaedic components. Powerful ultrasonic cleaning is available with advanced European tubular transducers with digital generators. These provide the most powerful Ultrasonic Cleaning action obtainable with over 95% output, more than any other type of Ultrasonic  can provide.

The LeanClean 360-2 cleans two baskets at a time in a side by side configuration. This provides better cleaning, rinsing and drying as well as easier loading than baskets stacked one on top of the other. This JENFAB machine will throughly clean and dry up to twice as much product per hour as any other two basket parts washer on the market. LET US PROVE IT!

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycles the solutions are filtered and recirculated on a continual basis into and through the cleaning chamber. The baskets are rotated  in solution as powerful under water jets purge the parts with fresh filtered solution. The cleaning chamber is completly purged with fresh filtered solution nearly two times every minute insuring even the most complex parts with blind holes are thoroughly cleaned. The continuous separation of chips and oil ensures a longer bath life.

Size Does Matter

The LeanClean 360-2 is designed to process two standard Jenfab Baskets  12 x 20 x 8 or two smaller baskets 12 x 18 x 6. The Difference is the Jenfab baskets have three times the net volume of the smaller baskets The chamber can also accept large parts weighing over 250lbs with dimensions of 24 x 20 x 8

One of the most important advantages of the Jenfab LeanClean 360-2 is the baskets are loaded and cleaned side by side. Side by side loading provides better cleaning rinsing and drying than stacking one basket on top of another.  In addition to better cleaning and drying the baskets are loaded faster and parts are cleaned and dried faster.

The Jenfab super dryer will dry parts other systems cannot.  Our 3000 CFM recirculating air flow design dries up to two times faster at lower temperatures and with less energy than regenerative types. Additionally with our recirulating design there is less heated air dumped into the plant atmosphere producing even greater benefits.

LeanClean 360-2 XL Model Designed for Large parts with Fixtures or Baskets 26" W x 22"D x 18"H 

Built for  Automotive manufactuer LeanClean 360-2 with Automatic Pallet Loader feature automatically takes pallets off line, cleans and dries then places pallet back into line

Large Medical Device Machined Part cleaned in LeanClean 360-2 XL model

Orthepedic Implant  Cleaning

Remanufactured Parts Cleaning

Aqueous Tube Cleaning and Degreasing including automotive fuel rail cleaning and aircraft and aviation fuel filter cleaning