The Jenfab 360-1 is a front loading rotating basket industrial parts washer designed to clean one basket of parts at a time. It is Ideal for general parts washing as well as precision cleaning of screw machined parts, cnc machined parts, fine blanked parts and stampings. Ultrasonic cleaning is added for critical cleaning of complex shaped parts including fuel system components, hydraulic valve bodies, Swiss Screw Machine parts, orthopaedic implant cleaning and medical device part cleaning.

The  Baskets are rotated in solution where powerful underwater spray jets remove chips and oils from blind holed and complex shaped parts. Powerful Ultrasonic Cleaning is available with advanced Tubular design transducers and digital generators. This provides the most powerful Ultrasonic Cleaning action obtainable with over 95% output, more than any other Ultrasonic type can provide.

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycle the solution is pumped through micron filters, delivered through High Impact Spray Jets and recirculated on a continual basis into the cleaning chamber. The basket is rotated in the solution as the powerful under water jets purge the submerged parts with fresh filtered solution insuring even the most complex parts with internal passagesand deep blind holes are thoroughly cleaned. The continual separation and removal of chips, soils and oil ensures a longer bath life.

Jenfab's LeanClean 360 Industrial Parts Washers feature the Ultra Fast Super Dryer which dries most parts at low temperatures and usually in less than half the time of any competitive brand.  This machine will throughly clean and dry up to twice as many baskets per hour as any other single basket machine on the market.  Let us demonstrate it!

Features include an ergonomic load height and Jenfab's innovative door design which doubles as a convenient loading shelf. There is no lifting required to load or unload baskets as with competitive brands. The operator simply places the basket onto the load shelf then pushes the basket into the cleaning chamber and closes the door. After the drying cycle ends the basket is pulled out. The LeanClean 360-1 is a compact self contained parts washer with a 3' x 5'-6" foot print designed to fit into Lean Manufacturing work cells.

 

       Precision cleaning Miniature Swiss Screw Machine parts and small Tubular parts

           Ultrsonic precision cleaning fuel Injector parts and fuel system components

Aqueous cleaning fuel system components         Aqueous Cleaning Fine blanked parts

Aqueous cleaning Aviation Filters                     Aqueous cleaning Bone Drills and Screws

For extremely delicate components which cannot be rotated an exclusive JENFAB feature allows selectable     5°-360° rocking of parts in solution  

Jenfab perforated stainless steel parts basket 12 x 20 x 6

Jenfab stainless steel wire mesh parts basket 12 x 18 x 6

Standard polypropylene glass reinforced parts basket with stainless lining

Custom designed part fixtures

Advanced Tubular design Ultrasonic Transducer