Building the Best Ultrasonic Cleaning Equipment for Over Forty Years
Quick Contact Request a Quote

Products

Quick Jump:

Vertical Chain Conveyor

The Vertical Chain Conveyor Part Washer is ideal for one piece at a time Inline Parts Washing combining both spray washing and agitated immersion cleaning with part drying in one small foot print. The VCC is ideal for Lean Manufacturing Cellular part cleaning operations. It is available as a front loading part washer for standalone cellular cleaning operations. Parts can be loaded and unloaded from the front or loaded from the front and unloaded out the rear.

Vertical Chain Conveyor Parts Washers occupy minimal floor space as it takes advantage of a vertical conveyor movement rather than a horizontal conveyor movement.  These Immersion cleaning machines are ideal for Ultrasonic Cleaning and rinsing for precision cleaning requirements.

How It Works

Parts are automatically transported from the load station and completely immersed in the wash solution. The parts are cleaned with a high pressure spray and immersed, which focuses the solution directly on the parts and continually flushes away chips, soils, debris and coolant.

Oil is removed and separated while chips are collected in the high volume micron filtration system. The solution is continually recirculated and filtered to insure a clean wash bath and to prevent a redeposit of soils on parts. Recirculating forced hot air dryers are designed to be energy efficient and to minimize floor space.

VCC systems are available with multiple tanks for part washing and rinsing and can be configured for cellular manufacturing one piece at a time part flow utilizing a common front load and unload location or for Inline Flow through part washing with automatic part loading and unloading of the parts at the front and unloading at the rear.

Jenfab has been building Vertical Chain Conveyor Parts Washers for nearly 40 years. These aqueous front loading and inline parts washers are also referred to as Cross Rod Degreasers and Cross Rod Parts Washers.

Dimensions (Wash & Dry):VCC 200: 60" W x 72" D x 84" H
VCC 300: 72" W x 84" D x 96" H
Tank Volume:VCC 200: 200 Gallons
VCC 300: 300 Gallons
Pump & Filter:VCC 200: 200 GPM @ 40 PSI
VCC 300: 250 GPM @ 40 PSI
Tank Material:VCC 200: 11 Ga. 304 Stainless Steel
VCC 300: 11 Ga. 304 Stainless Steel
Housing:VCC 200: 16 Ga. 304 Polished SS
VCC 300: 16 Ga. 304 Polished SS
Dryer:Energy Efficient Recirculating
VCC 200: 6000 CFM
VCC 300: 7500 CFM
Tank Heat:Stainless Steel
VCC 200: 48 KW
VCC 300: 72 KW
Dryer Heat:VCC 200: 48 KW
VCC 300: 60 KW
  • Additional Tanks for Rinse & Rust Proof
  • Ultrasonics for Wash and Rinse
  • Coalescing Oil Separator
  • Dual Filtration
  • Marine Type Cleanout Doors
  • Automatic Chemical Control System
  • Cool Down Station
  • Custom Sizes Available
Quick Contact > Request a Quote >