Building the Best Ultrasonic Cleaning Equipment for Over Forty Years
Quick Contact Request a Quote

Products

Quick Jump:

LeanClean 360-Jumbo

The Jenfab Lean Clean 360-8 and Lean Clean 360-8 Jumbo are ergonomically designed Front Loading Rotating Basket Parts Washers. All Lean Clean machines are stainless steel construction and standard with wash, rinse and Dry cycles and use environmentally safe Aqueous cleaning solutions.

Baskets are not stacked, this provides better cleaning, rinsing and drying as well as faster and easier loading than baskets stacked two high. The standard machine includes two process tanks for wash and rinse solutions with an option for adding a third tank.

The 360-8 Jumbo is a SUPER SIZED model designed to clean large parts placed in baskets or fixtuers. This high capacity machine is also widely used in MRO operations for commercial airline and defense industries for cleaning wheels, transmission components and aircraft engine parts.

With selected options the LeanClean 360 provides critical cleaning of precision parts including hydraulic valve bodies, ABS components, aviation and automotive fuel system components. These machines are also used in the Bio Medical Industry for Medical device cleaning including surgical instruments, bone screws and orthopaedic implant components. Powerful ultrasonic cleaning is available with advanced design Tubular Transducers and digital generators. This provides the most powerful ultrasonic cleaning action obtainable with over 95% output into solution, more than any other ultrasonic type can provide.

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycles the solutions are filtered and recirculated on a continual basis into the cleaning chamber. The basket is rotated in the solution as powerful under water jets purge the parts with fresh filtered solution over twice every minute insuring even the most complex parts with blind holes are thoroughly cleaned. The continuous separation of chips and oil ensures a longer bath cycle.

The Jenfab Super Dryer will dry parts other systems cannot. Our recirculating 8000 CFM air flow design dries up to two times faster at lower temperatures and with less energy than all other competitive brands. Additionally there is less heated air dumped into the plant atmosphere producing even greater benefits.

This Jenfab machine will throughly clean and dry up to twice as much product per hour as any other eight basket parts washer on the market. LET US PROVE IT!

Floor Space:10'-4"W x 8'6"D 87.5 sq. ft.
Load Height:42"
Tank Volume:360 Gallon Wash & Rinse Temperature: 160°
Pump Volume:Wash 250GPM @ 45PSIG
Pump Volume:Rinse 180GPM @ 45PSIG
Dryer Blower:8000 CMF Recirculating
Dryer Heat:60KW designed to dry at low temperatures
Sound Level:<80 DBA
Controls:PLC Controlled with color OIT / HMI and a Modem
Basket Size: Jenfab Stainless 12 x 20 x 8"
Basket Size: Kaydon/Edge 12 x 18 x 6"
Based on 6 Cycles per Hour:48 Jenfab Baskets process 48 cubic feet/hr
Stainless Steel Tanks, Chamber, Dryer
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets
  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil skimmer
  • Coalescing oil separator
  • Final fresh or DI water rinse header
  • Custom sizes available for larger loads
  • Rocking feature for delicate pars
  • Third tank for additional rinse, RP, or DI
Quick Contact > Request a Quote >