Building the Best Ultrasonic Cleaning Equipment for Over Forty Years
Quick Contact Request a Quote

Products

Quick Jump:

LeanClean 360-4

The Jenfab LeanClean 360-4 model cleans four baskets side by side at the same time.

This provides better cleaning, rinsing, and drying as well as faster, more efficient loading than baskets that are stacked on top of each other, two by two. The standard machine includes two process tanks for wash and rinse solutions with an option to add a third tank.

The Jenfab LeanClean 360-4 is an ergonomically designed front loading rotating basket parts washer. It is ideal for aqueous cleaning of machined parts, stampings, screw machines, and turned parts. The LeanClean 360-4 provides critical cleaning of precision parts which include hydraulic valve bodies, ABS, aviation, and automotive fuel system components. These machines are also used to clean surgical instruments, bone screws, and orthopedic implant components in the biomedical industry. The LeanClean 360-4 offers the most powerful ultrasonic cleaning available, advanced European tubular transducers with digital generators, and over 95% output, more than any other ultrasonic type can provide.

Baskets are loaded side by side rather than stacked, which makes for a more efficient and ergonomic system with faster loading and more thorough cleaning and drying.

The wash and rinse solution tanks are located beneath the cleaning chamber. During the cleaning cycles the solutions are filtered and recirculated on a continual basis into the cleaning chamber. The basket is rotated in the solution as powerful water jets purge the parts with fresh filtered solution over twice every minute. This insures that even the most complex parts with blind holes are thoroughly cleaned. The continuous separation of chips and oil ensures a longer bath cycle.

The Jenfab Difference

The LeanClean 360-4 is designed to process four baskets per cycle, either standard Kaydon/Edge 12” x 18” x 6” baskets or four Jenfab stainless steel baskets 12” x 20” x 8”, more than three times the volume of the Kaydon/Edge basket. The chamber also accepts large parts weighing over 400 lbs.

The Jenfab Super Dryer will dry parts that other systems cannot. Our recirculating 6000 CFM air flow design dries up to two times faster at lower temperatures and will less energy than all other competitive brands. Additionally less heated air is dumped into the plant atmosphere which produces an even greater benefit.

This Jenfab machine will thoroughly clean and dry up to two times as much product per hour as any other four basket parts washer on the market. LET US PROVE IT!

Specifications: 4 Basket
Floor Space:8' -2" W x 9' D 74 sq ft
Load Height:42"
Tank Volume:300 Gallons Wash & Rinse
Temperature: 160°
Pump Volume:180 GPM @ 40 PSIG
Dryer Blower:6000 CFM Recirculating
Dryer Heat:40KW designed to dry at low temperatures
Sound Level:< 79 DBA
ControlsPLC Controlled with OIT / HMI and including Modem
Basket Size:JENFAB Stainless 12 x 20 x 8"
Kaydon/Edge 12 x 18 x 6"
Based on 6 Cycles per Hour:24 JENFAB Baskets produce 24 cubic feet/hr

Specifications: 8 Basket
Floor Space:8'-6"Wx9'-6"D 81 sq ft
Load Height:42"
Tank Volume:300 Gallons Wash & Rinse
Temperature: 160°
Pump Volume:Wash 250GPM @50PSIG
Rinse 180GPM @50PSIG
Dryer Blower:7600 CFM Recirculating
Dryer Heat:60KW designed to dry at low temperatures
Sound Level:< 80 DBA
What Goes Here?PLC Controlled with OIT / HMI and including Modem
Basket Size:JENFAB Stainless 12 x 20 x 8"
Kaydon/Edge 12 x 18 x 6
Based on 6 Cycles per Hour:24 JENFAB Baskets produce 24 cubic feet/hr
Stainless Steel Tanks, Chamber, Dryer
Optional Stainless Steel Housing available
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets
  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil skimmer
  • Coalescing oil separator
  • Final fresh or DI water rinse header
  • Custom sizes available for larger loads
  • Rocking feature for delicate parts
Quick Contact > Request a Quote >