Building the Best Ultrasonic Cleaning Equipment for Over Forty Years
Quick Contact Request a Quote

Products

Quick Jump:

Indexing Turntable Parts Washer

The Indexing Turntable Parts Washer is a compact aqueous spray cleaning machine designed for one piece at a time part washing. Parts are loaded by robot or by hand onto a rotating fixture which indexes on a timed cycle from three seconds and up. Parts index into high pressure spray zones which remove machining chips and oils while cleaning out small holes and passages.

The parts are indexed to a spray wash which uses aqueous chemistry or coolant. After spray washing, the parts index to a spray rinse stage or directly to a high pressure self-contained blow off station.

The Indexing Turntable Spray Washer uses a precision index system to locate parts for loading by a robot or by hand. The index cycle is adjustable from three seconds on up to meet the required production.

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycle the solution is pumped through micron filters, delivered through high impact spray jets and recirculated on a continual basis into the cleaning chamber. The parts are continually sprayed with fresh filtered solution which insures that even the most complex parts with internal passages and deep blind holes are thoroughly cleaned. The continual separation and removal of chips, soils, and oil ensures a longer bath life.

  • Adjustable indexing speeds from three seconds
  • Quick change over for different parts
  • Adjustable spray positions
  • Cycles for: Wash-Rinse-Rust Prevent-Dry
  • Energy efficient drying
  • Stainless steel construction
  • Continuous oil removal
  • Micron filtration for precision cleaning
TT model high impingement spray
RB model immersion with submerged spray jets
Heavy gauge stainless steel construction
Stainless steel pumps
140° stainless steel solution heater
Stainless steel spray piping
480 volts p3 phase
Lift out stainless steel chip basket
Solution level control
NEMA 12 control panel
Programmable logic control
Interlocked cover
E-stop button
24 volt control system
Use with: aqueous and semi-aqueous cleaners, or machining coolants
Floor space is determined by the number of tanks required
Wash and Blow Off 3' x 4'
Wash-Rinse-Blow Off 3' x 5'
  • Stainless Steel Filter
  • Oil Skimmer
  • Electronic Level Controller
  • Regenerative Blower
  • Heater for Blow Off
  • AB Micro Logix PLC with Panelview
  • Ultrasonics
  • Custom Voltages
  • Automatic Cover
Quick Contact > Request a Quote >